K-13

  K-13 is the spray-applied insulation tailored to your specific project requirements for insulation (R value), noise reduction (NRC), color, durability, condensation control, texture, and aesthetics. In addition, it usually provides these features at lower installed prices than many common systems such as rigid board and batt insulations, sprayed plasters, and acoustical ceilings. It is applied to virtually any properly prepared surface configuration of wood, steel, concrete, glass and other common construction surfaces. K-13 can be sprayed up to five inches thick overhead in one application without mechanical support. Additionally, K-13 serves as the exposed finish requiring no additional materials.

A Total System: Fiber, Binder, Application
K-13 is a total system of recycled natural fibers, chemical treatement, binding system and application method. The K-13 system begins with specially prepared cellulose fibers which are chemically treated to add resistance to fire, mold and mildew. K-13 is produced in a strict, quality controlled manufacturing process. K-13 is applied by an international network of licensed applicators through approved fiber machines and nozzles for control of the fiber/binder ratio. During application, the K-13 fibers are combined with a patented adhesive. The finished product is a strong, durable monolithic coating of a predetermined thickness. Some surfaces will require priming prior to being sprayed. K-13 is available in 6 standard colors, special color matching is available.

Naturally Tough - Naturally Attractive
Available in a wide variety of colors, K-13 is especially attractive as a surface finish in new construction as well as renovation projects. Available in six standard colors, K-13 can also be specified in specially matched custom colors.

Thermal Performance
K-13 insulates by creating dead air spaces between and within its hollow fibers. Because K-13 fibers are sprayed-in-place, they fill cracks, seams and voids, forming a monolithic coating over the substrate which helps reduce air infiltration. Unlike prefabricated insulations, K-13 has no voids or compressed areas to reduce thermal efficiency. The result is a more effective in-place product with exceptionally low heat loss characteristics. The patented adhesive utilized in the installation of K-13 adheres to virtually all common construction materials including: metal, wood, concrete, urethane, styrofoam and glass. Some surfaces may require pretreatment prior to installing K-13. This unique adhesive provides unequaled strength allowing applications of 3/4 inch to over 5 inches without mechanical support. This capability provides R-values from 3 to over 19.

Condensation Control
For areas such as indoor pools and ice arenas, K-13 aids in condensation control. The proper combination of K-13 and ventilation prevents condensation on metal, concrete and other surfaces. K-13 actually reduces ventilation requirements, saving in both the ventilation equipment investment and operating cost.

Acoustical Performance
The resilient fibers of K-13 absorb sound energy instead of reflecting it, reducing reverberation time and making speech and music more intelligible. Excessive noise is reduced with the application of K-13 while greatly improving ambient sound quality in a wide variety of building projects including auditoriums, sports facilities, detention facilities, television and sound studios, convention centers and parking garages.

SonaSpray "fc"

  SonaSpray "fc" is a spray applied acoustical texture designed for a wide range of project types. SonaSpray "fc" provides an attractive, high performance solution to acoustical and lighting design objectives in both new construction and renovation projects. Typical installations include: schools, churches, passenger terminals, libraries, cafeterias, offices, hotels and condominiums.

SonaSpray "fc" is available in White and Artic White. Specially matched colors are also available as a design option.

Acoustical Performance
SonaSpray "fc", as tested by a NVLAP accredited acoustical laboratory per ASTM C-423, provides an exceptionally high noise reduction coefficient (NRC). A typical installation of 1/2" thick on solid backing, has an unequalled NRC of.65. At its maximum recommended thickness of 1", the NRC is .90.

Substrate Compatibility
SonaSpray "fc" is spray applied and will conform to any surface configuration such as barrel vaults, concrete "T", corrugated decks, pan construction and other complex surfaces. The high performance adhesive will bond to virtually all common construction materials including sheetrock, plaster, wood, metal and concrete. Some surfaces (such as water stained ceilings, wood and oxidized metal) will require sealing to prevent migratory staining of the SonaSpray "fc".

Durability and Maintenance
The adhesive used to apply SonaSpray "fc" provides a strong, durable and resilient bond. This unique combination of properties provides remarkable durability. SonaSpray "fc" will resist impact and abrasion without cracking or spalling, typical to any cementitions or plaster based materials. In areas where even high abrasion resistance may be desirable, SonaSpray "fc" Dura-K may be specified. This provides even greater bond and compressive strength without reducing the acoustical performance. SonaSpray "fc" can be painted with water based latex or acrylic paint if desired, without appreciably reducing the NRC value.
 

Celbar

  Celbar is a blend of specially prepared cellulose fibers, organic in nature, treated with adhesive and fire resistant chemicals. When sprayed in place, the interlocking fibers result in a mass that produces excellent sound and thermal properties.

Celbar is pneumatically spray-applied in wall and floor/ceiling cavities to form a monolithic coating. This process seals cracks and holes in the wallboard, around plumbing and electrical outlets, vent ducts and other irregularities. There are no compressed areas or voids to allow sound leaks, R-value reduction, or air infiltration.

Performance Where it Counts
Celbar provides superior sound transfer control demanded by building designers, owners and occupants. Celbar assemblies perform closer to lab tested STC ratings in the field than do other conventional batt and sound board systems. This is due to the complete coverage and the sealing action of Celbar.

The performance of Celbar compared to other identically constructed wall systems, as documented by laboratory tests is shown below.

The base system and results are as follows

Thermal Performance
Celbar's R-value of 3.8 per inch allows you to design exterior wall systems with higher total R-values. However, R-value alone is not the only measure of a product's thermal effectiveness. To obtain maximum thermal efficiency, air infiltration must be minimized. Sprayed in place, Celbar conforms to any substrate, around pipes, obstructions, and over cracks, reducing air infiltration and forming a highly efficient and effective thermal barrier. It can be sprayed to virtually any exterior stud or furred cavity, and in most cases the wall can be closed up the same day.

Energy Savings Example
In a series of tests, five identical buildings were monitored for KWH usage over an eleven month period. One building utilized sprayed cellulose in the walls, and the other four utilized fiberglass batt insulation. Upon conclusion, the cellulose-insulated building saved 32% of the KWH usage of the other buildings.

Metal Stud Assemblies Construction Detail
STC RATING 55 - 2 1/2" metal studs, 2 layers 5/8" gypsum board on one side, I layer 5/8" gypsum board on the opposite side: 2 l/2" Celbar Spray.

STC RATING 53 - 3 5/8" metal studs, 1 layers 5/8" gypsum board on each side: 2" Celbar Spray.

STC RATING 51 - 2 1/2" metal stud 24" O.C. faced both sides with 5/8" gypsum wallboard: 1 1/2" Celbar Spray.

Wood Assemblies Construction Detail
STC RATING 58 - 2 X 4 stud on a 2 x 6 plate spaced 16" O.C. and staggered on opposite sides, faced on both sides with 5/8" gypsum wallboard: I '/2" Celbar Spray.

STC RATING 56 - 2 X 4 stud 16" O.C. on two separate 2 x 4 plates with I " separation. Faced on one side with 5/8" gypsum wallboard and l/2'' gypsum wallboard other side 1'/2" Celbar Spray.

STC RATING 51 - 2" x 4" wood studs, I layer 5/8" gypsum board on each side: 31/2" Celbar Spray.

STC RATING 50 - 2" x 4" wood studs, 1 layer 5/8" gypsum board on each side: 2" Celbar Spray.